Port map and editor support for `CURVETYPE_BEZIER` from upstream, i.e. support bezier curves with configurable in- and out-tangents for every envelope point.
The in- and out-tangents are represented by triangles and can be dragged in the envelope editor like the envelope points.
Support reading and writing the bezier information as a separate UUID-based map item. If the bezier information is not found, bezier will default to linear behavior. Old clients will still be able to read the new maps and ignore the unknown map item. The unknown curvetype will also be handled as linear by old clients.
Allow reading upstream maps that use `CMapItemEnvelope` version 3. On upstream, a different struct is used to store all envelope points including bezier information, which broke compatibility to old clients.
Fix holding Ctrl for slow envelope point editing not working for vertical movement.
Highlight the currently selected element (envelope point or bezier tangent marker) which is being used with the value/time edit boxes.
Hide the value/time edit boxes when no element is selected.
To reduce duplicate code and to add validation for tile skip everywhere.
Add separate `CMapItemLayerTilemap::TILE_SKIP_MIN_VERSION` constant and change `CMapItemVersion::CURRENT_VERSION` back to the previous version, as maps with tile skip can be loaded but skip is not used when saving.
Add `CEditorMap::PerformSanityChecks` to perform additional sanity checks when loading a map in the editor.
In particular, the following is added: Check if there are any images with a width or height that is not divisible by 16 which are used in tile layers. Reset the image for these layers, to prevent crashes with some drivers.
Closes#6519.
Use `std::vector` in cases where elements are only inserted at the end of the collection.
Use `std::deque` in cases where elements are only inserted/deleted at the beginning/end of the collection.
Use `std::list` in the remaining single case where elements are being removed from arbitrary positions and added at either the beginning or the end of the collection.
Adjust variables names. Don't use separate prefix for `std::deque`s and `std::list`s, as they are only used very rarely. Closes#6779.
Compressing the data with zlib takes the majority of the time when saving a datafile. Therefore, compressing is now delayed until the `CDataFileWriter::Finish` function is called. This function is then off-loaded to another thread to make saving maps in the editor not block the rendering.
A message "Saving…" is shown in the bottom right of the editor view while a job to save a map is running in the background.
While a map is being finished in a background thread another save for the same filename cannot be initiated to prevent multiples accesses to the same file.
Closes#6762.
A copy of the map currently open in the editor is saved every 10 minutes to the `maps/auto` folder (interval configurable, see below). The automatically saved map uses the filename of the original map with an additional timestamp. Per map name 10 autosaves are kept in the `auto` folder before old autosaves will be deleted (number configurable, see below).
Add config variable `ed_autosave_interval` (0 - 240, default 10) to configure the interval in minutes at which a copy of the current editor map is automatically saved to the 'auto' folder.
Add config variable `ed_autosave_max` (0 - 1000, default 10) to configure the maximum number of autosaves that are kept per map name (0 = no limit).
Autosaving will not take place in the 5 seconds immediately after the map was last modified by the user, to avoid interrupting the user with the autosave.
This will only delay autosaving for up to 1 minute though, so autosaves are not prevented entirely, should the user continuously edit the map.
When the editor is reopened after being closed for more than 10 seconds, the autosave timer will be adjusted to compensate for the time that was not spent on editing in the editor.
When the map is saved manually by the user the autosave file is also updated, if it's outdated by at least half of the configured autosave interval. This ensures that autosaves are always available as a periodic backup of the map.
When a copy of the current map is saved, this does not update the autosave and will also no longer reset the modified state. The modified state should reflect whether changes have been made that are not saved to the current map file. As saving a copy does not update the current file, the modified state should not be reset in this case.
Closes#6693.
Use templated `str_copy` function in most cases to specify the correct buffer size.
Fixes two cases where the buffer size was hard-coded to a number.
Fix buffer size not being checked when copying auto mapper configuration name. Loading an auto mapper configuration with a name longer than 128 bytes could cause an out-of-bounds write.
Increase sizes of some text buffers that were potentially too small.
Use the utility function to check if tele/speedup/switch/tune tile indices are valid.
Using `IsValidSwitchTile` fixes that the switch number and delay were not updated when selecting freeze, deep freeze, deep unfreeze, live freeze and live unfreeze tiles, as those tiles were missing in the existing condition.
The `Append` method was returning `0` on success while `Load` and `Save` were returning `1`.
Now all three methods use a `bool` as return value and return `true` on success.
The call `SortImages()` is moved inside the `Append` method, as it should always be called when appending succeeded.
How this works: parallax values configure perceived distance from camera
when it's moving along x and y axes. Assume that zoom is moving the
camera away and scale layers accordingly, with background layers
(furtherst away) changing the least.
New per-ItemGroup (LayerGroup) setting allows to set the new parallax
value independently from the other two. This can be used to do tricks
like on Time Shop zoom correctly or make it feel like the camera is
changing the field of view at the same time as moving in space.
5205: Allow multiple addresses per server in the serverbrowser r=def- a=heinrich5991
Support is incomplete for `leak_ip_address_to_all_servers` (will only
ping the first address of each server) and for the `leak_ip` setting
(which will also only ping the first address of each server).
Fixes#5158.
## Checklist
- [x] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test if it works standalone, system.c especially
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: heinrich5991 <heinrich5991@gmail.com>
Support is incomplete for `leak_ip_address_to_all_servers` (will only
ping the first address of each server) and for the `leak_ip` setting
(which will also only ping the first address of each server).
Fix pointer and pointer array variable naming
Huge renaming to match our rules
Used regex: (?!(return|delete)\b)\b\w+ (m_|ms_|g_|gs_|s_)[^a]\w+\[
(?!(return|delete)\b)\b\w+ (?!(m_|ms_|g_|gs_|s_))[^a]\w+\[
Further format static variables
Format almost all pointer names accordingly
Used regex: (?!(return)\b)\b\w+
\*(?!(m_p|p|s_p|m_ap|s_ap|g_p|g_ap|ap|gs_ap|ms_ap|gs_p|ms_p))\w+\b[^:\(p]
clang-format
Fix CI fail
Fix misnamed non pointer as pointer and non array as array
Used regex: (?!(return|delete)\b)\b\w+ (m_|ms_|g_|gs_|s_)p\w+\b
(?!return\b)\b\w+ (ms_|m_|g_|gs_|s_)a\w+\b[^\[]
clang-format
Revert to SCREAMING_SNAKE_CASE and reinstate dead code
> Warn when a local variable shadows another local variable or parameter.
Found one actual bug in graphics_threaded.cpp
Should reduce confusion in the future when reading source code
Doesn't work on Windows, not so easy to overwrite a file already open in
editor. Not sure how our old approach works, but apparently it did
better than the new one. As reported by texnonik on Discord
This reverts commit e2084e1e9d.
Right now it is impossible to have a working external sound. External
sounds render unusable the moment the map is saved and given to another
player. For the mapper it seems like everything is working since the
mapper has the sound file. For anyone else it simply won't work. Since
1. there is no use for it and 2. it adds unnecessary complexity and
confusion, I propose removing it entirely.
and mark some false positives
/media/ddnet/src/engine/client/backend_sdl.cpp:329:30: warning: Call to 'malloc' has an allocation size of 0 bytes [clang-analyzer-optin.portability.UnixAPI]
ChillerDragon
