Struct regex::bytes::RegexBuilder

source ·
pub struct RegexBuilder { /* private fields */ }
Expand description

A configurable builder for a Regex.

This builder can be used to programmatically set flags such as i (case insensitive) and x (for verbose mode). This builder can also be used to configure things like the line terminator and a size limit on the compiled regular expression.

Implementations§

source§

impl RegexBuilder

source

pub fn new(pattern: &str) -> RegexBuilder

Create a new builder with a default configuration for the given pattern.

If the pattern is invalid or exceeds the configured size limits, then an error will be returned when RegexBuilder::build is called.

source

pub fn build(&self) -> Result<Regex, Error>

Compiles the pattern given to RegexBuilder::new with the configuration set on this builder.

If the pattern isn’t a valid regex or if a configured size limit was exceeded, then an error is returned.

source

pub fn unicode(&mut self, yes: bool) -> &mut RegexBuilder

This configures Unicode mode for the entire pattern.

Enabling Unicode mode does a number of things:

  • Most fundamentally, it causes the fundamental atom of matching to be a single codepoint. When Unicode mode is disabled, it’s a single byte. For example, when Unicode mode is enabled, . will match 💩 once, where as it will match 4 times when Unicode mode is disabled. (Since the UTF-8 encoding of 💩 is 4 bytes long.)
  • Case insensitive matching uses Unicode simple case folding rules.
  • Unicode character classes like \p{Letter} and \p{Greek} are available.
  • Perl character classes are Unicode aware. That is, \w, \s and \d.
  • The word boundary assertions, \b and \B, use the Unicode definition of a word character.

Note that unlike the top-level Regex for searching &str, it is permitted to disable Unicode mode even if the resulting pattern could match invalid UTF-8. For example, (?-u:.) is not a valid pattern for a top-level Regex, but is valid for a bytes::Regex.

For more details on the Unicode support in this crate, see the Unicode section in this crate’s top-level documentation.

The default for this is true.

Example
use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"\w")
    .unicode(false)
    .build()
    .unwrap();
// Normally greek letters would be included in \w, but since
// Unicode mode is disabled, it only matches ASCII letters.
assert!(!re.is_match("δ".as_bytes()));

let re = RegexBuilder::new(r"s")
    .case_insensitive(true)
    .unicode(false)
    .build()
    .unwrap();
// Normally 'ſ' is included when searching for 's' case
// insensitively due to Unicode's simple case folding rules. But
// when Unicode mode is disabled, only ASCII case insensitive rules
// are used.
assert!(!re.is_match("ſ".as_bytes()));

Since this builder is for constructing a bytes::Regex, one can disable Unicode mode even if it would match invalid UTF-8:

use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r".")
    .unicode(false)
    .build()
    .unwrap();
// Normally greek letters would be included in \w, but since
// Unicode mode is disabled, it only matches ASCII letters.
assert!(re.is_match(b"\xFF"));
source

pub fn case_insensitive(&mut self, yes: bool) -> &mut RegexBuilder

This configures whether to enable case insensitive matching for the entire pattern.

This setting can also be configured using the inline flag i in the pattern. For example, (?i:foo) matches foo case insensitively while (?-i:foo) matches foo case sensitively.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"foo(?-i:bar)quux")
    .case_insensitive(true)
    .build()
    .unwrap();
assert!(re.is_match(b"FoObarQuUx"));
// Even though case insensitive matching is enabled in the builder,
// it can be locally disabled within the pattern. In this case,
// `bar` is matched case sensitively.
assert!(!re.is_match(b"fooBARquux"));
source

pub fn multi_line(&mut self, yes: bool) -> &mut RegexBuilder

This configures multi-line mode for the entire pattern.

Enabling multi-line mode changes the behavior of the ^ and $ anchor assertions. Instead of only matching at the beginning and end of a haystack, respectively, multi-line mode causes them to match at the beginning and end of a line in addition to the beginning and end of a haystack. More precisely, ^ will match at the position immediately following a \n and $ will match at the position immediately preceding a \n.

The behavior of this option can be impacted by other settings too:

This setting can also be configured using the inline flag m in the pattern.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"^foo$")
    .multi_line(true)
    .build()
    .unwrap();
assert_eq!(Some(1..4), re.find(b"\nfoo\n").map(|m| m.range()));
source

pub fn dot_matches_new_line(&mut self, yes: bool) -> &mut RegexBuilder

This configures dot-matches-new-line mode for the entire pattern.

Perhaps surprisingly, the default behavior for . is not to match any character, but rather, to match any character except for the line terminator (which is \n by default). When this mode is enabled, the behavior changes such that . truly matches any character.

This setting can also be configured using the inline flag s in the pattern. For example, (?s:.) and \p{any} are equivalent regexes.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"foo.bar")
    .dot_matches_new_line(true)
    .build()
    .unwrap();
let hay = b"foo\nbar";
assert_eq!(Some(&b"foo\nbar"[..]), re.find(hay).map(|m| m.as_bytes()));
source

pub fn crlf(&mut self, yes: bool) -> &mut RegexBuilder

This configures CRLF mode for the entire pattern.

When CRLF mode is enabled, both \r (“carriage return” or CR for short) and \n (“line feed” or LF for short) are treated as line terminators. This results in the following:

  • Unless dot-matches-new-line mode is enabled, . will now match any character except for \n and \r.
  • When multi-line mode is enabled, ^ will match immediately following a \n or a \r. Similarly, $ will match immediately preceding a \n or a \r. Neither ^ nor $ will ever match between \r and \n.

This setting can also be configured using the inline flag R in the pattern.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"^foo$")
    .multi_line(true)
    .crlf(true)
    .build()
    .unwrap();
let hay = b"\r\nfoo\r\n";
// If CRLF mode weren't enabled here, then '$' wouldn't match
// immediately after 'foo', and thus no match would be found.
assert_eq!(Some(&b"foo"[..]), re.find(hay).map(|m| m.as_bytes()));

This example demonstrates that ^ will never match at a position between \r and \n. ($ will similarly not match between a \r and a \n.)

use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"^")
    .multi_line(true)
    .crlf(true)
    .build()
    .unwrap();
let hay = b"\r\n\r\n";
let ranges: Vec<_> = re.find_iter(hay).map(|m| m.range()).collect();
assert_eq!(ranges, vec![0..0, 2..2, 4..4]);
source

pub fn line_terminator(&mut self, byte: u8) -> &mut RegexBuilder

Configures the line terminator to be used by the regex.

The line terminator is relevant in two ways for a particular regex:

  • When dot-matches-new-line mode is not enabled (the default), then . will match any character except for the configured line terminator.
  • When multi-line mode is enabled (not the default), then ^ and $ will match immediately after and before, respectively, a line terminator.

In both cases, if CRLF mode is enabled in a particular context, then it takes precedence over any configured line terminator.

This option cannot be configured from within the pattern.

The default line terminator is \n.

Example

This shows how to treat the NUL byte as a line terminator. This can be a useful heuristic when searching binary data.

use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"^foo$")
    .multi_line(true)
    .line_terminator(b'\x00')
    .build()
    .unwrap();
let hay = b"\x00foo\x00";
assert_eq!(Some(1..4), re.find(hay).map(|m| m.range()));

This example shows that the behavior of . is impacted by this setting as well:

use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r".")
    .line_terminator(b'\x00')
    .build()
    .unwrap();
assert!(re.is_match(b"\n"));
assert!(!re.is_match(b"\x00"));

This shows that building a regex will work even when the byte given is not ASCII. This is unlike the top-level Regex API where matching invalid UTF-8 is not allowed.

Note though that you must disable Unicode mode. This is required because Unicode mode requires matching one codepoint at a time, and there is no way to match a non-ASCII byte as if it were a codepoint.

use regex::bytes::RegexBuilder;

assert!(
    RegexBuilder::new(r".")
        .unicode(false)
        .line_terminator(0x80)
        .build()
        .is_ok(),
);
source

pub fn swap_greed(&mut self, yes: bool) -> &mut RegexBuilder

This configures swap-greed mode for the entire pattern.

When swap-greed mode is enabled, patterns like a+ will become non-greedy and patterns like a+? will become greedy. In other words, the meanings of a+ and a+? are switched.

This setting can also be configured using the inline flag U in the pattern.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

let re = RegexBuilder::new(r"a+")
    .swap_greed(true)
    .build()
    .unwrap();
assert_eq!(Some(&b"a"[..]), re.find(b"aaa").map(|m| m.as_bytes()));
source

pub fn ignore_whitespace(&mut self, yes: bool) -> &mut RegexBuilder

This configures verbose mode for the entire pattern.

When enabled, whitespace will treated as insignifcant in the pattern and # can be used to start a comment until the next new line.

Normally, in most places in a pattern, whitespace is treated literally. For example + will match one or more ASCII whitespace characters.

When verbose mode is enabled, \# can be used to match a literal # and \ can be used to match a literal ASCII whitespace character.

Verbose mode is useful for permitting regexes to be formatted and broken up more nicely. This may make them more easily readable.

This setting can also be configured using the inline flag x in the pattern.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

let pat = r"
    \b
    (?<first>\p{Uppercase}\w*)  # always start with uppercase letter
    [\s--\n]+                   # whitespace should separate names
    (?: # middle name can be an initial!
        (?:(?<initial>\p{Uppercase})\.|(?<middle>\p{Uppercase}\w*))
        [\s--\n]+
    )?
    (?<last>\p{Uppercase}\w*)
    \b
";
let re = RegexBuilder::new(pat)
    .ignore_whitespace(true)
    .build()
    .unwrap();

let caps = re.captures(b"Harry Potter").unwrap();
assert_eq!(&b"Harry"[..], &caps["first"]);
assert_eq!(&b"Potter"[..], &caps["last"]);

let caps = re.captures(b"Harry J. Potter").unwrap();
assert_eq!(&b"Harry"[..], &caps["first"]);
// Since a middle name/initial isn't required for an overall match,
// we can't assume that 'initial' or 'middle' will be populated!
assert_eq!(
    Some(&b"J"[..]),
    caps.name("initial").map(|m| m.as_bytes()),
);
assert_eq!(None, caps.name("middle").map(|m| m.as_bytes()));
assert_eq!(&b"Potter"[..], &caps["last"]);

let caps = re.captures(b"Harry James Potter").unwrap();
assert_eq!(&b"Harry"[..], &caps["first"]);
// Since a middle name/initial isn't required for an overall match,
// we can't assume that 'initial' or 'middle' will be populated!
assert_eq!(None, caps.name("initial").map(|m| m.as_bytes()));
assert_eq!(
    Some(&b"James"[..]),
    caps.name("middle").map(|m| m.as_bytes()),
);
assert_eq!(&b"Potter"[..], &caps["last"]);
source

pub fn octal(&mut self, yes: bool) -> &mut RegexBuilder

This configures octal mode for the entire pattern.

Octal syntax is a little-known way of uttering Unicode codepoints in a pattern. For example, a, \x61, \u0061 and \141 are all equivalent patterns, where the last example shows octal syntax.

While supporting octal syntax isn’t in and of itself a problem, it does make good error messages harder. That is, in PCRE based regex engines, syntax like \1 invokes a backreference, which is explicitly unsupported this library. However, many users expect backreferences to be supported. Therefore, when octal support is disabled, the error message will explicitly mention that backreferences aren’t supported.

The default for this is false.

Example
use regex::bytes::RegexBuilder;

// Normally this pattern would not compile, with an error message
// about backreferences not being supported. But with octal mode
// enabled, octal escape sequences work.
let re = RegexBuilder::new(r"\141")
    .octal(true)
    .build()
    .unwrap();
assert!(re.is_match(b"a"));
source

pub fn size_limit(&mut self, bytes: usize) -> &mut RegexBuilder

Sets the approximate size limit, in bytes, of the compiled regex.

This roughly corresponds to the number of heap memory, in bytes, occupied by a single regex. If the regex would otherwise approximately exceed this limit, then compiling that regex will fail.

The main utility of a method like this is to avoid compiling regexes that use an unexpected amount of resources, such as time and memory. Even if the memory usage of a large regex is acceptable, its search time may not be. Namely, worst case time complexity for search is O(m * n), where m ~ len(pattern) and n ~ len(haystack). That is, search time depends, in part, on the size of the compiled regex. This means that putting a limit on the size of the regex limits how much a regex can impact search time.

For more information about regex size limits, see the section on untrusted inputs in the top-level crate documentation.

The default for this is some reasonable number that permits most patterns to compile successfully.

Example
use regex::bytes::RegexBuilder;

// It may surprise you how big some seemingly small patterns can
// be! Since \w is Unicode aware, this generates a regex that can
// match approximately 140,000 distinct codepoints.
assert!(RegexBuilder::new(r"\w").size_limit(45_000).build().is_err());
source

pub fn dfa_size_limit(&mut self, bytes: usize) -> &mut RegexBuilder

Set the approximate capacity, in bytes, of the cache of transitions used by the lazy DFA.

While the lazy DFA isn’t always used, in tends to be the most commonly use regex engine in default configurations. It tends to adopt the performance profile of a fully build DFA, but without the downside of taking worst case exponential time to build.

The downside is that it needs to keep a cache of transitions and states that are built while running a search, and this cache can fill up. When it fills up, the cache will reset itself. Any previously generated states and transitions will then need to be re-generated. If this happens too many times, then this library will bail out of using the lazy DFA and switch to a different regex engine.

If your regex provokes this particular downside of the lazy DFA, then it may be beneficial to increase its cache capacity. This will potentially reduce the frequency of cache resetting (ideally to 0). While it won’t fix all potential performance problems with the lazy DFA, increasing the cache capacity does fix some.

There is no easy way to determine, a priori, whether increasing this cache capacity will help. In general, the larger your regex, the more cache it’s likely to use. But that isn’t an ironclad rule. For example, a regex like [01]*1[01]{N} would normally produce a fully build DFA that is exponential in size with respect to N. The lazy DFA will prevent exponential space blow-up, but it cache is likely to fill up, even when it’s large and even for smallish values of N.

If you aren’t sure whether this helps or not, it is sensible to set this to some arbitrarily large number in testing, such as usize::MAX. Namely, this represents the amount of capacity that may be used. It’s probably not a good idea to use usize::MAX in production though, since it implies there are no controls on heap memory used by this library during a search. In effect, set it to whatever you’re willing to allocate for a single regex search.

source

pub fn nest_limit(&mut self, limit: u32) -> &mut RegexBuilder

Set the nesting limit for this parser.

The nesting limit controls how deep the abstract syntax tree is allowed to be. If the AST exceeds the given limit (e.g., with too many nested groups), then an error is returned by the parser.

The purpose of this limit is to act as a heuristic to prevent stack overflow for consumers that do structural induction on an AST using explicit recursion. While this crate never does this (instead using constant stack space and moving the call stack to the heap), other crates may.

This limit is not checked until the entire AST is parsed. Therefore, if callers want to put a limit on the amount of heap space used, then they should impose a limit on the length, in bytes, of the concrete pattern string. In particular, this is viable since this parser implementation will limit itself to heap space proportional to the length of the pattern string. See also the untrusted inputs section in the top-level crate documentation for more information about this.

Note that a nest limit of 0 will return a nest limit error for most patterns but not all. For example, a nest limit of 0 permits a but not ab, since ab requires an explicit concatenation, which results in a nest depth of 1. In general, a nest limit is not something that manifests in an obvious way in the concrete syntax, therefore, it should not be used in a granular way.

Example
use regex::bytes::RegexBuilder;

assert!(RegexBuilder::new(r"a").nest_limit(0).build().is_ok());
assert!(RegexBuilder::new(r"ab").nest_limit(0).build().is_err());

Trait Implementations§

source§

impl Clone for RegexBuilder

source§

fn clone(&self) -> RegexBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for RegexBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.