Struct toml_edit::Datetime

source ·
pub struct Datetime {
    pub date: Option<Date>,
    pub time: Option<Time>,
    pub offset: Option<Offset>,
}
Expand description

A parsed TOML datetime value

This structure is intended to represent the datetime primitive type that can be encoded into TOML documents. This type is a parsed version that contains all metadata internally.

Currently this type is intentionally conservative and only supports to_string as an accessor. Over time though it’s intended that it’ll grow more support!

Note that if you’re using Deserialize to deserialize a TOML document, you can use this as a placeholder for where you’re expecting a datetime to be specified.

Also note though that while this type implements Serialize and Deserialize it’s only recommended to use this type with the TOML format, otherwise encoded in other formats it may look a little odd.

Depending on how the option values are used, this struct will correspond with one of the following four datetimes from the TOML v1.0.0 spec:

datetimeoffsetTOML type
Some(_)Some(_)Some(_)Offset Date-Time
Some(_)Some(_)NoneLocal Date-Time
Some(_)NoneNoneLocal Date
NoneSome(_)NoneLocal Time

1. Offset Date-Time: If all the optional values are used, Datetime corresponds to an Offset Date-Time. From the TOML v1.0.0 spec:

To unambiguously represent a specific instant in time, you may use an RFC 3339 formatted date-time with offset.

odt1 = 1979-05-27T07:32:00Z
odt2 = 1979-05-27T00:32:00-07:00
odt3 = 1979-05-27T00:32:00.999999-07:00

For the sake of readability, you may replace the T delimiter between date and time with a space character (as permitted by RFC 3339 section 5.6).

odt4 = 1979-05-27 07:32:00Z

2. Local Date-Time: If date and time are given but offset is None, Datetime corresponds to a Local Date-Time. From the spec:

If you omit the offset from an RFC 3339 formatted date-time, it will represent the given date-time without any relation to an offset or timezone. It cannot be converted to an instant in time without additional information. Conversion to an instant, if required, is implementation- specific.

ldt1 = 1979-05-27T07:32:00
ldt2 = 1979-05-27T00:32:00.999999

3. Local Date: If only date is given, Datetime corresponds to a Local Date; see the docs for Date.

4. Local Time: If only time is given, Datetime corresponds to a Local Time; see the docs for Time.

Fields§

§date: Option<Date>

Optional date. Required for: Offset Date-Time, Local Date-Time, Local Date.

§time: Option<Time>

Optional time. Required for: Offset Date-Time, Local Date-Time, Local Time.

§offset: Option<Offset>

Optional offset. Required for: Offset Date-Time.

Trait Implementations§

source§

impl Clone for Datetime

source§

fn clone(&self) -> Datetime

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for Datetime

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<'de> Deserialize<'de> for Datetime

source§

fn deserialize<D>( deserializer: D ) -> Result<Datetime, <D as Deserializer<'de>>::Error>
where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl Display for Datetime

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl From<Date> for Datetime

source§

fn from(other: Date) -> Datetime

Converts to this type from the input type.
source§

impl From<Datetime> for Value

source§

fn from(d: Datetime) -> Self

Converts to this type from the input type.
source§

impl From<Time> for Datetime

source§

fn from(other: Time) -> Datetime

Converts to this type from the input type.
source§

impl FromStr for Datetime

§

type Err = DatetimeParseError

The associated error which can be returned from parsing.
source§

fn from_str(date: &str) -> Result<Datetime, DatetimeParseError>

Parses a string s to return a value of this type. Read more
source§

impl Ord for Datetime

source§

fn cmp(&self, other: &Datetime) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for Datetime

source§

fn eq(&self, other: &Datetime) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for Datetime

source§

fn partial_cmp(&self, other: &Datetime) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Serialize for Datetime

source§

fn serialize<S>( &self, serializer: S ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl Copy for Datetime

source§

impl Eq for Datetime

source§

impl StructuralEq for Datetime

source§

impl StructuralPartialEq for Datetime

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,