1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389
/// Prints to [`stdout`][crate::stdout].
///
/// Equivalent to the [`println!`] macro except that a newline is not printed at
/// the end of the message.
///
/// Note that stdout is frequently line-buffered by default so it may be
/// necessary to use [`std::io::Write::flush()`] to ensure the output is emitted
/// immediately.
///
/// **NOTE:** The `print!` macro will lock the standard output on each call. If you call
/// `print!` within a hot loop, this behavior may be the bottleneck of the loop.
/// To avoid this, lock stdout with [`AutoStream::lock`][crate::AutoStream::lock]:
/// ```
/// # #[cfg(feature = "auto")] {
/// use std::io::Write as _;
///
/// let mut lock = anstream::stdout().lock();
/// write!(lock, "hello world").unwrap();
/// # }
/// ```
///
/// Use `print!` only for the primary output of your program. Use
/// [`eprint!`] instead to print error and progress messages.
///
/// **NOTE:** Not all `print!` calls will be captured in tests like [`std::print!`]
/// - Capturing will automatically be activated in test binaries
/// - Otherwise, only when the `test` feature is enabled
///
/// # Panics
///
/// Panics if writing to `stdout` fails for any reason **except** broken pipe.
///
/// Writing to non-blocking stdout can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// # #[cfg(feature = "auto")] {
/// use std::io::Write as _;
/// use anstream::print;
/// use anstream::stdout;
///
/// print!("this ");
/// print!("will ");
/// print!("be ");
/// print!("on ");
/// print!("the ");
/// print!("same ");
/// print!("line ");
///
/// stdout().flush().unwrap();
///
/// print!("this string has a newline, why not choose println! instead?\n");
///
/// stdout().flush().unwrap();
/// # }
/// ```
#[cfg(feature = "auto")]
#[macro_export]
macro_rules! print {
($($arg:tt)*) => {{
if cfg!(any(feature = "test", test)) {
use std::io::Write as _;
let stdio = std::io::stdout();
let choice = $crate::AutoStream::choice(&stdio);
let buffer = Vec::new();
let mut stream = $crate::AutoStream::new(buffer, choice);
// Ignore errors rather than panic
let _ = ::std::write!(&mut stream, $($arg)*);
let buffer = stream.into_inner();
// Should be UTF-8 but not wanting to panic
let buffer = String::from_utf8_lossy(&buffer);
::std::print!("{}", buffer)
} else {
use std::io::Write as _;
let mut stream = $crate::stdout();
match ::std::write!(&mut stream, $($arg)*) {
Err(e) if e.kind() != ::std::io::ErrorKind::BrokenPipe => {
::std::panic!("failed printing to stdout: {e}");
}
Err(_) | Ok(_) => {}
}
}
}};
}
/// Prints to [`stdout`][crate::stdout], with a newline.
///
/// On all platforms, the newline is the LINE FEED character (`\n`/`U+000A`) alone
/// (no additional CARRIAGE RETURN (`\r`/`U+000D`)).
///
/// This macro uses the same syntax as [`format!`], but writes to the standard output instead.
/// See [`std::fmt`] for more information.
///
/// **NOTE:** The `println!` macro will lock the standard output on each call. If you call
/// `println!` within a hot loop, this behavior may be the bottleneck of the loop.
/// To avoid this, lock stdout with [`AutoStream::lock`][crate::AutoStream::lock]:
/// ```
/// # #[cfg(feature = "auto")] {
/// use std::io::Write as _;
///
/// let mut lock = anstream::stdout().lock();
/// writeln!(lock, "hello world").unwrap();
/// # }
/// ```
///
/// Use `println!` only for the primary output of your program. Use
/// [`eprintln!`] instead to print error and progress messages.
///
/// **NOTE:** Not all `println!` calls will be captured in tests like [`std::println!`]
/// - Capturing will automatically be activated in test binaries
/// - Otherwise, only when the `test` feature is enabled
///
/// # Panics
///
/// Panics if writing to `stdout` fails for any reason **except** broken pipe.
///
/// Writing to non-blocking stdout can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// # #[cfg(feature = "auto")] {
/// use anstream::println;
///
/// println!(); // prints just a newline
/// println!("hello there!");
/// println!("format {} arguments", "some");
/// let local_variable = "some";
/// println!("format {local_variable} arguments");
/// # }
/// ```
#[cfg(feature = "auto")]
#[macro_export]
macro_rules! println {
() => {
$crate::print!("\n")
};
($($arg:tt)*) => {{
if cfg!(any(feature = "test", test)) {
use std::io::Write as _;
let stdio = std::io::stdout();
let choice = $crate::AutoStream::choice(&stdio);
let buffer = Vec::new();
let mut stream = $crate::AutoStream::new(buffer, choice);
// Ignore errors rather than panic
let _ = ::std::write!(&mut stream, $($arg)*);
let buffer = stream.into_inner();
// Should be UTF-8 but not wanting to panic
let buffer = String::from_utf8_lossy(&buffer);
::std::println!("{}", buffer)
} else {
use std::io::Write as _;
let mut stream = $crate::stdout();
match ::std::writeln!(&mut stream, $($arg)*) {
Err(e) if e.kind() != ::std::io::ErrorKind::BrokenPipe => {
::std::panic!("failed printing to stdout: {e}");
}
Err(_) | Ok(_) => {}
}
}
}};
}
/// Prints to [`stderr`][crate::stderr].
///
/// Equivalent to the [`print!`] macro, except that output goes to
/// `stderr` instead of `stdout`. See [`print!`] for
/// example usage.
///
/// Use `eprint!` only for error and progress messages. Use `print!`
/// instead for the primary output of your program.
///
/// **NOTE:** Not all `eprint!` calls will be captured in tests like [`std::eprint!`]
/// - Capturing will automatically be activated in test binaries
/// - Otherwise, only when the `test` feature is enabled
///
/// # Panics
///
/// Panics if writing to `stderr` fails for any reason **except** broken pipe.
///
/// Writing to non-blocking stdout can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// # #[cfg(feature = "auto")] {
/// use anstream::eprint;
///
/// eprint!("Error: Could not complete task");
/// # }
/// ```
#[cfg(feature = "auto")]
#[macro_export]
macro_rules! eprint {
($($arg:tt)*) => {{
if cfg!(any(feature = "test", test)) {
use std::io::Write as _;
let stdio = std::io::stderr();
let choice = $crate::AutoStream::choice(&stdio);
let buffer = Vec::new();
let mut stream = $crate::AutoStream::new(buffer, choice);
// Ignore errors rather than panic
let _ = ::std::write!(&mut stream, $($arg)*);
let buffer = stream.into_inner();
// Should be UTF-8 but not wanting to panic
let buffer = String::from_utf8_lossy(&buffer);
::std::eprint!("{}", buffer)
} else {
use std::io::Write as _;
let mut stream = $crate::stderr();
match ::std::write!(&mut stream, $($arg)*) {
Err(e) if e.kind() != ::std::io::ErrorKind::BrokenPipe => {
::std::panic!("failed printing to stdout: {e}");
}
Err(_) | Ok(_) => {}
}
}
}};
}
/// Prints to [`stderr`][crate::stderr], with a newline.
///
/// Equivalent to the [`println!`] macro, except that output goes to
/// `stderr` instead of `stdout`. See [`println!`] for
/// example usage.
///
/// Use `eprintln!` only for error and progress messages. Use `println!`
/// instead for the primary output of your program.
///
/// **NOTE:** Not all `eprintln!` calls will be captured in tests like [`std::eprintln!`]
/// - Capturing will automatically be activated in test binaries
/// - Otherwise, only when the `test` feature is enabled
///
/// # Panics
///
/// Panics if writing to `stderr` fails for any reason **except** broken pipe.
///
/// Writing to non-blocking stdout can cause an error, which will lead
/// this macro to panic.
///
/// # Examples
///
/// ```
/// # #[cfg(feature = "auto")] {
/// use anstream::eprintln;
///
/// eprintln!("Error: Could not complete task");
/// # }
/// ```
#[cfg(feature = "auto")]
#[macro_export]
macro_rules! eprintln {
() => {
$crate::eprint!("\n")
};
($($arg:tt)*) => {{
if cfg!(any(feature = "test", test)) {
use std::io::Write as _;
let stdio = std::io::stderr();
let choice = $crate::AutoStream::choice(&stdio);
let buffer = Vec::new();
let mut stream = $crate::AutoStream::new(buffer, choice);
// Ignore errors rather than panic
let _ = ::std::write!(&mut stream, $($arg)*);
let buffer = stream.into_inner();
// Should be UTF-8 but not wanting to panic
let buffer = String::from_utf8_lossy(&buffer);
::std::eprintln!("{}", buffer)
} else {
use std::io::Write as _;
let mut stream = $crate::stderr();
match ::std::writeln!(&mut stream, $($arg)*) {
Err(e) if e.kind() != ::std::io::ErrorKind::BrokenPipe => {
::std::panic!("failed printing to stdout: {e}");
}
Err(_) | Ok(_) => {}
}
}
}};
}
/// Panics the current thread.
///
/// This allows a program to terminate immediately and provide feedback
/// to the caller of the program.
///
/// This macro is the perfect way to assert conditions in example code and in
/// tests. `panic!` is closely tied with the `unwrap` method of both
/// [`Option`][ounwrap] and [`Result`][runwrap] enums. Both implementations call
/// `panic!` when they are set to [`None`] or [`Err`] variants.
///
/// When using `panic!()` you can specify a string payload, that is built using
/// the [`format!`] syntax. That payload is used when injecting the panic into
/// the calling Rust thread, causing the thread to panic entirely.
///
/// The behavior of the default `std` hook, i.e. the code that runs directly
/// after the panic is invoked, is to print the message payload to
/// `stderr` along with the file/line/column information of the `panic!()`
/// call. You can override the panic hook using [`std::panic::set_hook()`].
/// Inside the hook a panic can be accessed as a `&dyn Any + Send`,
/// which contains either a `&str` or `String` for regular `panic!()` invocations.
/// To panic with a value of another other type, [`panic_any`] can be used.
///
/// See also the macro [`compile_error!`], for raising errors during compilation.
///
/// # When to use `panic!` vs `Result`
///
/// The Rust language provides two complementary systems for constructing /
/// representing, reporting, propagating, reacting to, and discarding errors. These
/// responsibilities are collectively known as "error handling." `panic!` and
/// `Result` are similar in that they are each the primary interface of their
/// respective error handling systems; however, the meaning these interfaces attach
/// to their errors and the responsibilities they fulfill within their respective
/// error handling systems differ.
///
/// The `panic!` macro is used to construct errors that represent a bug that has
/// been detected in your program. With `panic!` you provide a message that
/// describes the bug and the language then constructs an error with that message,
/// reports it, and propagates it for you.
///
/// `Result` on the other hand is used to wrap other types that represent either
/// the successful result of some computation, `Ok(T)`, or error types that
/// represent an anticipated runtime failure mode of that computation, `Err(E)`.
/// `Result` is used alongside user defined types which represent the various
/// anticipated runtime failure modes that the associated computation could
/// encounter. `Result` must be propagated manually, often with the the help of the
/// `?` operator and `Try` trait, and they must be reported manually, often with
/// the help of the `Error` trait.
///
/// For more detailed information about error handling check out the [book] or the
/// [`std::result`] module docs.
///
/// [ounwrap]: Option::unwrap
/// [runwrap]: Result::unwrap
/// [`std::panic::set_hook()`]: ../std/panic/fn.set_hook.html
/// [`panic_any`]: ../std/panic/fn.panic_any.html
/// [`Box`]: ../std/boxed/struct.Box.html
/// [`Any`]: crate::any::Any
/// [`format!`]: ../std/macro.format.html
/// [book]: ../book/ch09-00-error-handling.html
/// [`std::result`]: ../std/result/index.html
///
/// # Current implementation
///
/// If the main thread panics it will terminate all your threads and end your
/// program with code `101`.
///
/// # Examples
///
/// ```should_panic
/// # #![allow(unreachable_code)]
/// use anstream::panic;
/// panic!();
/// panic!("this is a terrible mistake!");
/// panic!("this is a {} {message}", "fancy", message = "message");
/// ```
#[cfg(feature = "auto")]
#[macro_export]
macro_rules! panic {
() => {
::std::panic!()
};
($($arg:tt)*) => {{
use std::io::Write as _;
let panic_stream = std::io::stderr();
let choice = $crate::AutoStream::choice(&panic_stream);
let buffer = Vec::new();
let mut stream = $crate::AutoStream::new(buffer, choice);
// Ignore errors rather than panic
let _ = ::std::write!(&mut stream, $($arg)*);
let buffer = stream.into_inner();
// Should be UTF-8 but not wanting to panic
let buffer = String::from_utf8_lossy(&buffer).into_owned();
::std::panic!("{}", buffer)
}};
}