Previously the same message popup context was used for all error messages. While multiple message popups could be opened at the same time, the message would always be the same for all, as the same buffer was used for all popups.
This is fixed by creating and destroying the message popup contexts dynamically, so there can be any number of message popups with different messages. Additionally, if a popup with an identical message is already open, it will first be closed and then reopened at the new position, to prevent duplicate message popups.
Show a short message below the existing chat mentions message that is shown in the top left area of the editor above the layers/images/sounds button when the player character is moved ingame while the editor is open. The messages are cleared when the editor is activated and when the client is disconnected.
Closes#1993.
Add `CEditorMap::PerformSanityChecks` to perform additional sanity checks when loading a map in the editor.
In particular, the following is added: Check if there are any images with a width or height that is not divisible by 16 which are used in tile layers. Reset the image for these layers, to prevent crashes with some drivers.
Closes#6519.
Use separate columns for icons and spacing like in the server browser.
Always show scrollbar for more consistent layout.
Show ellipsis if filename is too long, also for the filename shown in the demo player.
Hide number of markers and length if the demo is invalid.
6820: Improve demo (video) renderer UX r=def- a=Kaffeine
<!-- What is the motivation for the changes of this pull request? -->
In this MR I want to address three issues with video recorder:
1. A bug: if I start a rendering with 0.25x speed and click on 'Increase the speed' during the rendering, I expect to get the next speed (0.5x) but as the speed index is not set (kept default `4`), the speed is boosted to 1.25x.
2. Usecase: I want to adjust the camera (change position, decrease zoom, etc) for the demos and I don't want to use extra video editor to cut the first frames with the unwanted camera moves/setups from the demo. I came to a simple solution: start the rendering pre-paused to do the needed adjustments before anything is added to the video.
3. NotABug: All recorded video files have double `.demo.mp4` extension which is ugly.
Probably I have to change something to fit DDNet codebase. E.g. I don't know if `Localize("(paused)")` is acceptable here.
<!-- Note that builds and other checks will be run for your change. Don't feel intimidated by failures in some of the checks. If you can't resolve them yourself, experienced devs can also resolve them before merging your pull request. -->
## Before
## After
## Checklist
- [x] Tested the change ingame
- [x] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Alexander Akulich <akulichalexander@gmail.com>
6823: Mark `NETMSGTYPE_CL_STARTINFO` as `MSGFLAG_FLUSH` r=def- a=Robyt3
This makes the client connect to the server faster. It's especially noticeable on servers with a low ping.
Closes#6811.
## Checklist
- [X] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
The targets of many popup menus become invalid when loading or creating a new map with the editor hotkeys, so all popup menus have to be closed in this case, otherwise this can cause crashes with several different popups.
6663: New spectate mode (multiview) r=def- a=Vy0x2
<!-- What is the motivation for the changes of this pull request? -->
Adding a new spectator mode, that can spectate a team by moving the camera in the middle and zooming in/out
Works with team 0 or any team, but you have to work with it a bit to get used to it. I tried to make it as intuitive as possible.
Pr is as ready as it can get, please test it.
Youtube video:<a href="http://www.youtube.com/watch?feature=player_embedded&v=7GM6DA3EYAI" target="_blank">
<img src="http://img.youtube.com/vi/7GM6DA3EYAI/maxresdefault.jpg" alt="Watch the video" width="192" height="108"/>
</a>
<!-- Note that builds and other checks will be run for your change. Don't feel intimidated by failures in some of the checks. If you can't resolve them yourself, experienced devs can also resolve them before merging your pull request. -->
## Checklist
- [x] Tested the change ingame
- [x] Provided screenshots if it is a visual change
- [x] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [x] Considered possible null pointers and out of bounds array indexing
- [x] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: devdenn <denispaul43@gmail.com>
Co-authored-by: Vy0x2 <denispaul43@gmail.com>
Initially the file browser (maps, images, sound) shows the files from all storage locations combined like before when opening a file for reading. When saving a map, only the save storage location is shown and used like before.
The folder ".." is now also shown in the root folder, to navigate up to the storage location selection, if more than one storage location is present where a "maps"/"mapres" folder exists (whichever the dialog is currently showing). Only the locations where one of those folders exists are shown in the storage location selection. Additionally "All combined" can be selected to go back to the combined view.
The "Show directory" button behavior is adjusted so that the folder that contains the currently selected item is opened. When the storage location selection is shown, the button opens the selected storage location instead.
When navigating to the parent folder, the previous folder is now initially selected instead of resetting the selection.
Add a link to the "themes" folder same as the link to the "downloadedmaps" folder to allow easier access to the themes with the map editor.
The "folder tree" icon which is used for the ".." folder is now also used for the folder links in the storage location selection and for the links to the "downloadedmaps" and "themes" folders.
Always sort links above normal folders but below the ".." folder.
Fix alignment of font icons by using the correct flags.
Initially the demo browser shows the demos from all storage locations combined like before.
The folder ".." is now also shown in the root folder, to navigate up to the storage location selection, if more than one storage location is present where a "demos" folder exists. Only the locations where one of those folders exists are shown in the storage location selection. Additionally "All combined" can be selected to go back to the combined view.
When navigating to the parent folder, the previous folder is now initially selected instead of resetting the selection.
The "Demos directory" button behavior is adjusted so that the folder that contains the currently selected item is opened. When the storage location selection is shown, the button opens the selected storage location instead.
The "folder tree" icon which is used for the ".." folder is now also for the folder links in the storage location selection.
Fix alignment of font icons by using the correct flags.
The config variable `ui_demo_selected` is removed and replaced with an internal buffer. The selected demo was always reset when restarting anyway and this would also not work with demos in subfolders either.
For long editor texts (group name, layer name, image name, sound name, file names, tooltips) make use of the font scaling and ellipsis functionality implemented in `DoLabel` instead of implementing it separately in the editor.
Add `SLabelProperties::m_EllipsisAtEnd` to render an ellipsis when using `DoLabel`.
Fix `m_StopAtEnd` and `m_EllipsisAtEnd` not working together with the automatic font scaling. Now the stop-at-end and ellipsis flags will only have an effect when the automatic font scaling has reached the minimum font size already.
Add `SLabelProperties` argument to `DoLabelStreamed` and adjust usages in server browser. Font scaling now has to be disabled explicitly for the server name, gametype and map, as these should use the stop-at-end flag without the font-scaling.
6790: Prevent /swap with paused players r=def- a=Robyt3
Prevent swapping if either of the players is paused (i.e. their character is not in the gameworld), as this can cause them to be stuck in midair after swapping, which can be exploited to skip parts.
## Checklist
- [X] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [X] Tested in combination with possibly related configuration options (servers with `sv_pauseable 0` were and are unaffected)
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
6793: Use `std::vector` and `std::deque` instead of most `std::list`s r=def- a=Robyt3
Use `std::vector` in cases where elements are only inserted at the end of the collection.
Use `std::deque` in cases where elements are only inserted/deleted at the beginning/end of the collection.
Use `std::list` in the remaining single case where elements are being removed from arbitrary positions and added at either the beginning or the end of the collection.
Adjust variables names. Don't use separate prefix for `std::deque`s and `std::list`s, as they are only used very rarely. Closes#6779.
## Checklist
- [ ] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
6792: Fix proximity radius of predicted pickups r=def- a=trml
Radius was set to 0 before this, so pickups were sometimes not predicted.
## Checklist
- [x] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [x] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: trml <trml@users.noreply.github.com>
Use `std::vector` in cases where elements are only inserted at the end of the collection.
Use `std::deque` in cases where elements are only inserted/deleted at the beginning/end of the collection.
Use `std::list` in the remaining single case where elements are being removed from arbitrary positions and added at either the beginning or the end of the collection.
Adjust variables names. Don't use separate prefix for `std::deque`s and `std::list`s, as they are only used very rarely. Closes#6779.
Prevent swapping if either of the players is paused (i.e. their character is not in the gameworld), as this can cause them to be stuck in midair after swapping, which can be exploited to skip parts.
