`shared_ptr`s of `CServer::m_pDnsblLookup[ClientID]` are set, but not
cleaned up when done. Therefore the Job is kept alive until the player
disconnects and a new player joins on that slot. Currently this means
that the full linked list of jobs is kept alive.
When the Job is overwritten with a new job, all the remaining objects in
the list can be dropped. With enough jobs, that is causing a stack
overflow in the destructor.
This patch fixes this overflow by making the lifetime independent of the
previous Job. Jobs can get dropped after processing them, even when the
previous job is still alive.
Fixes#6954
The old code looked pretty weird. It checked for `CFGFLAG_SERVER |
CFGFLAG_GAME` being set above, and then used the passed-in parameter to
find the command. I think it'd be better to just look for `CFGFLAG_GAME`
and then find the command using `CFGFLAG_GAME`.
Check if datafile data cannot be read entirely (according to the data size specified in the header) and check for decompression errors. In case of errors, let `GetData` return `nullptr` and `GetDataSize` return `0` for the respective index.
Internally the decompressed size is set to `-1` for data which failed to load, so loading of those data will not be attempted again because it would only fail again and can cause additional log messages.
Port the `CJsonWriter` utility class from upstream, which makes outputting correct JSON easier.
Add `CJsonWriter` as an abstract class that can write to different outputs. Two implementations `CJsonFileWriter` (writes to a file) and `CJsonStringWriter` (writes to an `std::string`) are added. Upstream `CJsonWriter` can only write to files.
The same tests are added for both implementations. Duplicate code is avoided by using typed tests with two separate test fixtures.
`stdout_output_level` for printing to stdout, `console_output_level` for
printing to local console and remote console and `loglevel` for the log
file.
Keep the old log level filters 0 for info and more severe, 1 for debug
and more severe and 2 for trace and more severe, introducing -1 for
warn, and -2 for error. -3 will show no log messages at all.
Port map and editor support for `CURVETYPE_BEZIER` from upstream, i.e. support bezier curves with configurable in- and out-tangents for every envelope point.
The in- and out-tangents are represented by triangles and can be dragged in the envelope editor like the envelope points.
Support reading and writing the bezier information as a separate UUID-based map item. If the bezier information is not found, bezier will default to linear behavior. Old clients will still be able to read the new maps and ignore the unknown map item. The unknown curvetype will also be handled as linear by old clients.
Allow reading upstream maps that use `CMapItemEnvelope` version 3. On upstream, a different struct is used to store all envelope points including bezier information, which broke compatibility to old clients.
Fix holding Ctrl for slow envelope point editing not working for vertical movement.
Highlight the currently selected element (envelope point or bezier tangent marker) which is being used with the value/time edit boxes.
Hide the value/time edit boxes when no element is selected.
Previously it reported the internal file data size (compressed). This
made the `map_resave` tool do the wrong job.
Co-authored-by: heinrich5991 <heinrich5991@gmail.com>
To reduce duplicate code and to add validation for tile skip everywhere.
Add separate `CMapItemLayerTilemap::TILE_SKIP_MIN_VERSION` constant and change `CMapItemVersion::CURRENT_VERSION` back to the previous version, as maps with tile skip can be loaded but skip is not used when saving.
When multiple files or folder have the same name in multiple storage locations, only pass the first entry (file or folder, whichever comes first) to the callback. To prevent files with the same name form being listed multiple times, e.g. in the demo browser, editor file browser, and asset lists.
6755: Remove individual RGBA sliders from editor color picker, add shift+rightclick/leftclick to copy/paste color in editor r=Jupeyy a=Robyt3
Remove the individual RGBA sliders for editor color pickers and only show one button that opens the color picker popup instead.
Decrease size of layer and point popups that previously had color properties which need less space now.
Support shift-rightclicking color picker buttons to copy the color to the clipboard in RRGGBBAA hex format.
Support shift-leftclicking color picker buttons to paste a color from the clipboard in RGB, RGBA, RRGGBB or RRGGBBAA format with optional leading `#` or `$`.
Screenshots:
- Before:
- After:
- After (color picker open):
Suggested by `@HiRavie` in https://github.com/ddnet/ddnet/pull/6743#issuecomment-1593886873, though it was easier and also looks better to me when the color picker button has exactly the same size as the other value selectors.
## Checklist
- [X] Tested the change ingame
- [X] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
Compressing the data with zlib takes the majority of the time when saving a datafile. Therefore, compressing is now delayed until the `CDataFileWriter::Finish` function is called. This function is then off-loaded to another thread to make saving maps in the editor not block the rendering.
A message "Saving…" is shown in the bottom right of the editor view while a job to save a map is running in the background.
While a map is being finished in a background thread another save for the same filename cannot be initiated to prevent multiples accesses to the same file.
Closes#6762.
A copy of the map currently open in the editor is saved every 10 minutes to the `maps/auto` folder (interval configurable, see below). The automatically saved map uses the filename of the original map with an additional timestamp. Per map name 10 autosaves are kept in the `auto` folder before old autosaves will be deleted (number configurable, see below).
Add config variable `ed_autosave_interval` (0 - 240, default 10) to configure the interval in minutes at which a copy of the current editor map is automatically saved to the 'auto' folder.
Add config variable `ed_autosave_max` (0 - 1000, default 10) to configure the maximum number of autosaves that are kept per map name (0 = no limit).
Autosaving will not take place in the 5 seconds immediately after the map was last modified by the user, to avoid interrupting the user with the autosave.
This will only delay autosaving for up to 1 minute though, so autosaves are not prevented entirely, should the user continuously edit the map.
When the editor is reopened after being closed for more than 10 seconds, the autosave timer will be adjusted to compensate for the time that was not spent on editing in the editor.
When the map is saved manually by the user the autosave file is also updated, if it's outdated by at least half of the configured autosave interval. This ensures that autosaves are always available as a periodic backup of the map.
When a copy of the current map is saved, this does not update the autosave and will also no longer reset the modified state. The modified state should reflect whether changes have been made that are not saved to the current map file. As saving a copy does not update the current file, the modified state should not be reset in this case.
Closes#6693.
To append to log file instead of overwriting it. To use you can create a
data/autoexec_client.cfg with:
logfile "client.log"
logappend 1
Enabled by default
6657: Allow rcon users access to reserved slots r=def- a=Learath2
<!-- What is the motivation for the changes of this pull request? -->
The password for the reserved slots keep getting leaked. Hopefully this will fix the issue.
<!-- Note that builds and other checks will be run for your change. Don't feel intimidated by failures in some of the checks. If you can't resolve them yourself, experienced devs can also resolve them before merging your pull request. -->
## Checklist
- [x] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [x] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [x] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Learath <learath2@gmail.com>
Cast `int`s to `unsigned` before subtracting to ensure that integer wrapping is being used instead of causing undefined behavior. Same as in `UndiffItem`.
```
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior src/master/src/base/math.h:16:40 in
src/master/src/engine/shared/snapshot.cpp:206:21: runtime error: signed integer overflow: 256 - -2147483648 cannot be represented in type 'int'
0 0x7650b7 in CSnapshotDelta::DiffItem(int const*, int const*, int*, int) src/master/src/engine/shared/snapshot.cpp:206:21
1 0x765cea in CSnapshotDelta::CreateDelta(CSnapshot*, CSnapshot*, void*) src/master/src/engine/shared/snapshot.cpp:323:7
2 0x51a0e2 in CServer::DoSnapshot() src/master/src/engine/server/server.cpp:964:36
3 0x537486 in CServer::Run() src/master/src/engine/server/server.cpp:2818:6
4 0x4feeb7 in main src/master/src/engine/server/main.cpp:190:21
5 0x7fc51ec27d09 in __libc_start_main csu/../csu/libc-start.c:308:16
6 0x4c3819 in _start (servers/DDNet-Server-ubsan+0x4c3819)
src/master/src/engine/shared/snapshot.cpp:206:21: runtime error: signed integer overflow: 1645289600 - -2139062144 cannot be represented in type 'int'
0 0x7650b7 in CSnapshotDelta::DiffItem(int const*, int const*, int*, int) src/master/src/engine/shared/snapshot.cpp:206:21
1 0x765cea in CSnapshotDelta::CreateDelta(CSnapshot*, CSnapshot*, void*) src/master/src/engine/shared/snapshot.cpp:323:7
2 0x51a0e2 in CServer::DoSnapshot() src/master/src/engine/server/server.cpp:964:36
3 0x537486 in CServer::Run() src/master/src/engine/server/server.cpp:2818:6
4 0x4feeb7 in main src/master/src/engine/server/main.cpp:190:21
5 0x7efd50c4ed09 in __libc_start_main csu/../csu/libc-start.c:308:16
6 0x4c3819 in _start (servers/DDNet-Server-ubsan+0x4c3819)
```
See #6650.
Add `inp_ime_native_ui` on Windows to use native IME UI instead of rendering the candidate list in the client.
Always set the SDL hint to use native UI on non-Windows, as we cannot determine the list of candidates on those systems.
ChillerDragon
Edgar
