So that buttons in the status bar cannot be used while a popup or the file dialog is open.
The tooltip still has to be rendered after popup menus, as popup menus can set the tooltip, which would otherwise not be shown.
Use `CLineInput::GetActiveInput` and `CLineInput::IsActive` instead for consistency.
The last active item pointer is now only tracked internally in `CUI` to deactivate the active line input when it's no longer used in the UI.
Write the map to a temporary file first. When the map was saved to the temporary file successfully, first delete the existing map file having the real filename, then rename the temporary file to the real filename.
If deleting or renaming fails, show an error message popup and log an error message to the console.
The implementation is consistent with the way temporary files are utilized by Microsoft Word, so this should work on Windows.
See: https://support.microsoft.com/en-us/topic/description-of-how-word-creates-temporary-files-66b112fb-d2c0-8f40-a0be-70a367cc4c85
Different from #4482, this first deletes the old map file before renaming the temporary file. Although it appears that renaming a file would also override the target file, it could be that this does not work on all systems. Additionally, this adds descriptive error messages in the cases of failure.
Closes#4476.
Co-authored-by: Dennis Felsing <dennis@felsin9.de>
Port map and editor support for `CURVETYPE_BEZIER` from upstream, i.e. support bezier curves with configurable in- and out-tangents for every envelope point.
The in- and out-tangents are represented by triangles and can be dragged in the envelope editor like the envelope points.
Support reading and writing the bezier information as a separate UUID-based map item. If the bezier information is not found, bezier will default to linear behavior. Old clients will still be able to read the new maps and ignore the unknown map item. The unknown curvetype will also be handled as linear by old clients.
Allow reading upstream maps that use `CMapItemEnvelope` version 3. On upstream, a different struct is used to store all envelope points including bezier information, which broke compatibility to old clients.
Fix holding Ctrl for slow envelope point editing not working for vertical movement.
Highlight the currently selected element (envelope point or bezier tangent marker) which is being used with the value/time edit boxes.
Hide the value/time edit boxes when no element is selected.
6840: Fix enter not working in server browser when no server selected, fix enter not working in editor save dialog when no map selected r=def- a=Robyt3
## Checklist
- [X] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
To make input handling consistent with the gameclient. Also skip input events that are not valid, same as in the gameclient, as this otherwise causes input events to be handled multiple times.
Replace `CEditor::m_EditBoxActive` which only works with editboxes created from the editor with `CLineInput::GetActiveInput` which also works for editboxes which are created by generic UI functions, e.g. the value selector editboxes of color pickers.
Previously the same message popup context was used for all error messages. While multiple message popups could be opened at the same time, the message would always be the same for all, as the same buffer was used for all popups.
This is fixed by creating and destroying the message popup contexts dynamically, so there can be any number of message popups with different messages. Additionally, if a popup with an identical message is already open, it will first be closed and then reopened at the new position, to prevent duplicate message popups.
Show a short message below the existing chat mentions message that is shown in the top left area of the editor above the layers/images/sounds button when the player character is moved ingame while the editor is open. The messages are cleared when the editor is activated and when the client is disconnected.
Closes#1993.
The targets of many popup menus become invalid when loading or creating a new map with the editor hotkeys, so all popup menus have to be closed in this case, otherwise this can cause crashes with several different popups.
Initially the file browser (maps, images, sound) shows the files from all storage locations combined like before when opening a file for reading. When saving a map, only the save storage location is shown and used like before.
The folder ".." is now also shown in the root folder, to navigate up to the storage location selection, if more than one storage location is present where a "maps"/"mapres" folder exists (whichever the dialog is currently showing). Only the locations where one of those folders exists are shown in the storage location selection. Additionally "All combined" can be selected to go back to the combined view.
The "Show directory" button behavior is adjusted so that the folder that contains the currently selected item is opened. When the storage location selection is shown, the button opens the selected storage location instead.
When navigating to the parent folder, the previous folder is now initially selected instead of resetting the selection.
Add a link to the "themes" folder same as the link to the "downloadedmaps" folder to allow easier access to the themes with the map editor.
The "folder tree" icon which is used for the ".." folder is now also used for the folder links in the storage location selection and for the links to the "downloadedmaps" and "themes" folders.
Always sort links above normal folders but below the ".." folder.
Fix alignment of font icons by using the correct flags.
For long editor texts (group name, layer name, image name, sound name, file names, tooltips) make use of the font scaling and ellipsis functionality implemented in `DoLabel` instead of implementing it separately in the editor.
Use `std::vector` in cases where elements are only inserted at the end of the collection.
Use `std::deque` in cases where elements are only inserted/deleted at the beginning/end of the collection.
Use `std::list` in the remaining single case where elements are being removed from arbitrary positions and added at either the beginning or the end of the collection.
Adjust variables names. Don't use separate prefix for `std::deque`s and `std::list`s, as they are only used very rarely. Closes#6779.
6755: Remove individual RGBA sliders from editor color picker, add shift+rightclick/leftclick to copy/paste color in editor r=Jupeyy a=Robyt3
Remove the individual RGBA sliders for editor color pickers and only show one button that opens the color picker popup instead.
Decrease size of layer and point popups that previously had color properties which need less space now.
Support shift-rightclicking color picker buttons to copy the color to the clipboard in RRGGBBAA hex format.
Support shift-leftclicking color picker buttons to paste a color from the clipboard in RGB, RGBA, RRGGBB or RRGGBBAA format with optional leading `#` or `$`.
Screenshots:
- Before:
- After:
- After (color picker open):
Suggested by `@HiRavie` in https://github.com/ddnet/ddnet/pull/6743#issuecomment-1593886873, though it was easier and also looks better to me when the color picker button has exactly the same size as the other value selectors.
## Checklist
- [X] Tested the change ingame
- [X] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
6763: Autosave copy of current editor map periodically to `auto` folder, use separate thread to finish saving maps, add saving indicator r=def- a=Robyt3
A copy of the map currently open in the editor is saved every 10 minutes to the `maps/auto` folder (interval configurable, see below). The automatically saved map uses the filename of the original map with an additional timestamp. Per map name 10 autosaves are kept in the `auto` folder before old autosaves will be deleted (number configurable, see below).
Add config variable `ed_autosave_interval` (0 - 240, default 10) to configure the interval in minutes at which a copy of the current editor map is automatically saved to the 'auto' folder.
Add config variable `ed_autosave_max` (0 - 1000, default 10) to configure the maximum number of autosaves that are kept per map name (0 = no limit).
Autosaving will not take place in the 5 seconds immediately after the map was last modified by the user, to avoid interrupting the user with the autosave.
This will only delay autosaving for up to 1 minute though, so autosaves are not prevented entirely, should the user continuously edit the map.
When the editor is reopened after being closed for more than 10 seconds, the autosave timer will be adjusted to compensate for the time that was not spent on editing in the editor.
When the map is saved manually by the user the autosave file is also updated, if it's outdated by at least half of the configured autosave interval. This ensures that autosaves are always available as a periodic backup of the map.
When a copy of the current map is saved, this does not update the autosave and will also no longer reset the modified state. The modified state should reflect whether changes have been made that are not saved to the current map file. As saving a copy does not update the current file, the modified state should not be reset in this case.
Closes#6693.
Compressing the data with zlib takes the majority of the time when saving a datafile. Therefore, compressing is now delayed until the `CDataFileWriter::Finish` function is called. This function is then off-loaded to another thread to make saving maps in the editor not block the rendering.
A message "Saving…" is shown in the bottom right of the editor view while a job to save a map is running in the background.
While a map is being finished in a background thread another save for the same filename cannot be initiated to prevent multiples accesses to the same file.
Closes#6762.
## Checklist
- [X] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [X] Tested in combination with possibly related configuration options
- [X] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [X] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
Compressing the data with zlib takes the majority of the time when saving a datafile. Therefore, compressing is now delayed until the `CDataFileWriter::Finish` function is called. This function is then off-loaded to another thread to make saving maps in the editor not block the rendering.
A message "Saving…" is shown in the bottom right of the editor view while a job to save a map is running in the background.
While a map is being finished in a background thread another save for the same filename cannot be initiated to prevent multiples accesses to the same file.
Closes#6762.
A copy of the map currently open in the editor is saved every 10 minutes to the `maps/auto` folder (interval configurable, see below). The automatically saved map uses the filename of the original map with an additional timestamp. Per map name 10 autosaves are kept in the `auto` folder before old autosaves will be deleted (number configurable, see below).
Add config variable `ed_autosave_interval` (0 - 240, default 10) to configure the interval in minutes at which a copy of the current editor map is automatically saved to the 'auto' folder.
Add config variable `ed_autosave_max` (0 - 1000, default 10) to configure the maximum number of autosaves that are kept per map name (0 = no limit).
Autosaving will not take place in the 5 seconds immediately after the map was last modified by the user, to avoid interrupting the user with the autosave.
This will only delay autosaving for up to 1 minute though, so autosaves are not prevented entirely, should the user continuously edit the map.
When the editor is reopened after being closed for more than 10 seconds, the autosave timer will be adjusted to compensate for the time that was not spent on editing in the editor.
When the map is saved manually by the user the autosave file is also updated, if it's outdated by at least half of the configured autosave interval. This ensures that autosaves are always available as a periodic backup of the map.
When a copy of the current map is saved, this does not update the autosave and will also no longer reset the modified state. The modified state should reflect whether changes have been made that are not saved to the current map file. As saving a copy does not update the current file, the modified state should not be reset in this case.
Closes#6693.
Which was causing the listbox selection to be cleared when activating the filename editbox, as the filename search expects names without the file extension.
Add button to play/stop audio preview and label showing selected sound duration in editor sound list and sound file browser.
Show error message instead of preview in editor image/sound file browser when selected file cannot be loaded.
When using "Save Copy" to save a copy of the current map to a new file and selecting a file that already exists, a confirmation popup is shown. However, this confirmation popup did not differentiate between regular saving and saving a copy, so the regular save callback was always called.
When the text is slightly longer (e.g. X and Y positions having multiple digits), the font size of the info text in the menubar decreases because not enough space is available.
Show one decimal place also for the current world X and Y position of the mouse, which allows to determine the position of the mouse inside the currently hovered tile.
Support shift-rightclicking color picker buttons to copy the color to the clipboard in RRGGBBAA hex format.
Support shift-leftclicking color picker buttons to paste a color from the clipboard in RGB, RGBA, RRGGBB or RRGGBBAA format with optional leading `#` or `$`.
Remove the individual RGBA sliders for editor color pickers and only show one button that opens the color picker popup instead.
Decrease size of layer and point popups that previously had color properties which need less space now.
By replacing the editor specific color picker popup with the generic UI color picker popup.
Improve layout of the editor color picker button. Improve spacing and ensure that the button is square. Slightly enlarge button on mouse hover.
This otherwise breaks file loading because the file extension is expected in this input buffer even when the input is not rendered.
Regression from #6736.
6737: Refactor `str_copy` usages and buffer sizes in editor r=def- a=Robyt3
Use templated `str_copy` function in most cases to specify the correct buffer size.
Fixes two cases where the buffer size was hard-coded to a number.
Fix buffer size not being checked when copying auto mapper configuration name. Loading an auto mapper configuration with a name longer than 128 bytes could cause an out-of-bounds write.
Increase sizes of some text buffers that were potentially too small.
## Checklist
- [X] Tested the change ingame
- [ ] Provided screenshots if it is a visual change
- [ ] Tested in combination with possibly related configuration options
- [ ] Written a unit test (especially base/) or added coverage to integration test
- [ ] Considered possible null pointers and out of bounds array indexing
- [ ] Changed no physics that affect existing maps
- [ ] Tested the change with [ASan+UBSan or valgrind's memcheck](https://github.com/ddnet/ddnet/#using-addresssanitizer--undefinedbehavioursanitizer-or-valgrinds-memcheck) (optional)
Co-authored-by: Robert Müller <robytemueller@gmail.com>
